INOXIDABLES AUSTENÍTICOS
309L
Resto de ALEACIONES DE INOXIDABLES AUSTENÍTICOS:
309L-T1
E309LT1-1/4 / 23 12 L P C1/M21 1
309L-T1 (E309LT1-1/4 / 23 12 L P C1/M21 1) es un hilo tubular para soldadura en todas posiciones usado principalmente bajo altas condiciones de dilución, en materiales de tipo 309 y particularmente en soldaduras disimilares entre aceros al C-Mn e inoxidables. Muy usado como capa intermedia o «buttering» antes de plaquear con otras aleaciones.
Producto:
309L-T1
Proceso:
FCAW
Norma:
AWS: A5.22 E309LT1-1/4
ISO: 17633-A T 23 12 L P C1/M21 1
Composición química
309L-T1 (E309LT1-1/4 / 23 12 L P C1/M21 1)
C | Cr | Ni | Mn | Si | P | S | cu | Otros |
---|---|---|---|---|---|---|---|---|
0.030 | 23.5 | 12.6 | 0.80 | 0.40 | 0.020 | 0.010 | 0.15 | <0.50 |
C | Cr | Ni | Mn | Si | P | S | cu | Otros |
---|---|---|---|---|---|---|---|---|
0.030 | 23.5 | 12.6 | 0.80 | 0.40 | 0.020 | 0.010 | 0.15 | <0.50 |
⇐⇐ Desliza si no ves la tabla completa
Propiedades mecánicas
309L-T1 (E309LT1-1/4 / 23 12 L P C1/M21 1)
Rm[Mpa] | Rs[Mpa] | A% | Impact(J) |
---|---|---|---|
580 | 450 | 35 | 43 [-20ºC] |
Rm[Mpa] | Rs[Mpa] | A% | Impact(J) |
---|---|---|---|
580 | 450 | 35 | 43 [-20ºC] |
